Products
-
Robotic Laser cladding System for blades
Laser cladding technology is the use of high-energy laser beam (104-106w/cm2) irradiation of the metal surface, simultaneous melting, expansion and solidification, the substrate surface plated with a layer of materials with special physical, chemical or mechanical properties, so as to form a new layer of alloy with a very low dilution rate, to compensate for the performance of the original substrate material, according to the requirements of the performance of the product, to obtain the heat-resistant, abrasion-resistant, resistance to electricity, corrosion, fatigue or optical, electrical and magnetic properties of the surface layer.
-
All-digital Intelligent Precision Replacement Welding Equipment HRWS-3160
Small heat affected zone. No need for preheating treatment, no annealing of the workpiece after welding. No deformation and collapsed edge. No porosity and sand holes. Accurate and precise welding of small and precise geometrical zones with the finest wires up to 0.1-0.2 mm, easy to use and flexible, direct on-site repair, eliminating the need for costly separation of the workpiece or repair part. It can be used to repair cracks, chips, corners, sand holes and after wear and tear.
-
DYY-LC501 Hydraulic rod automatic plasma cladding machine
The machine is driven by imported linear guide, precision worm gear reducer and stepping motor, with small transmission clearance, high rigidity, stable and reliable operation and convenient integration.
-
precision micro plasma arc welding machine
Plasma arc welding is a welding method using plasma arc as heat source.The gas is dissociated by arc heating and compressed when it passes through the water cooling nozzle at high speed, which increases the energy density and dissociation degree and forms a plasma arc.Its stability, calorific value and temperature are higher than those of ordinary arc, so it has higher penetration force and welding speed.Argon is generally used for the gas forming the plasma arc and the protective gas around it.According to the material properties of various workpieces, argon, hydrogen and other mixed gases are also used.
-
Laser hardening robot
Laser hardening tooth, short process term, heating and cooling swiftly, no need the media to do, tinny deformation, clean working environment , no need the fine processing.
-
DZF-LC401 Straight seam automatic plasma welding platform
Straight seam and longitudinal seam series tooling is mainly used for welding inner and outer longitudinal seam of medium and thin wall cylinder. It can be equipped with paw, TIG, MIG / MAG welding tooling.It is suitable for the welding of carbon steel, stainless steel, aluminum and its alloy, titanium and its alloy, etc. it can be used for the welding of products such as food machinery, dyeing and finishing equipment, power switch bus tube, medical machinery, special chemical containers, power pipes, air conditioning unit shell, etc. the welding process is reliable and efficient, and the whole welding process is digitally controlled.
DZF series straight seam welding tooling is a professional automatic equipment for plate butt welding, which has the advantages of high degree of automation, excellent weld quality and high efficiency.
-
plasma powder surfacing machine DML-V03CD
It is a metal surface modification equipment independently developed by our company with completely independent intellectual property rights. The welding process is one of the effective technical methods to improve the wear resistance, corrosion resistance and impact resistance of metal surface.
-
Strong practicality and heat-resistant tungsten electrode
It is in possession of material with high-melting, high density, anti-corrosion, good conductivity of heat and electricity, which is fixed by tungsten clamp and back cap in the torch. Normally, the diameters (2.4mm——8.0mm) are applied.
-
Cheap And Serviceable Rubble Ring For Plasma Torch
The rubber ring made of silicone loop it is superior to the ordinary rubble ring for sealing.
-
Durable Service And High Precision Tungsten Calibrator
This type of Tungsten Calibrator for PTA welding torch, the main work purpose is to calibrate internal shrinkage of tungsten electrode that pledges discharge normally. Generally speaking, it is 2-4mm of the tungsten electrode shrinking inside the nozzle that we have to use it to measure.
-
Robust Nozzle With Firm And Strong Plasma Transferred Arc
The copper nozzle is the core parts of the PTA welding torch. And here is a pore of powder feeding inside of the nozzle that would delivery the powder to plasma arc without any intervention to complete the process of powder cladding.
-
Gas shield cover
The type of gas shield cover for PTA welding torch is for protecting gas against oxidation that it is to preserve well melting pool to keep the welding bead to form greatly.
